Extrusion Control & Supply

Extrusion Control is your one stop source for everything you need to keep your equipment clean and running smoothly. We offer a full range of products for the mechanical and chemical removal of unwanted deposits as well as the protective gear to keep you safe while removing them.

Material Removal

Material Removal

Remove excess plastic and unwanted deposits from your extruder and tooling.  We supply bore and hand brushes, copper gauze, and non-scratch scrapers.  Die soap and flakes are great time savers for sheet and cast film dies.  Fluidized baths can be used for cleaning breaker plates, small tooling and small screws efficiently and without damaging the metallurgical properties of the item being cleaned.

read more >

Material Removal

Remove excess plastic and unwanted deposits from your extruder and tooling.  We supply bore and hand brushes, copper gauze, and non-scratch scrapers.  Die soap and flakes are great time savers for sheet and cast film dies.  Fluidized baths can be used for cleaning breaker plates, small tooling and small screws efficiently and without damaging the metallurgical properties of the item being cleaned.

read more >

Material Removal
Apparel

Apparel

Cleaning your equipment doesn’t have to be a dirty or dangerous job if you have the right apparel. Extrusion Control has heat resistant gloves and sleeves, as well as gloves for a variety of other tasks. We carry cotton canvas gloves, cotton hot mill, standard leather palm, double leather palm, and Kevlar gloves. Call us today or visit our e-store to see our selection.

read more >

Apparel

Cleaning your equipment doesn’t have to be a dirty or dangerous job if you have the right apparel. Extrusion Control has heat resistant gloves and sleeves, as well as gloves for a variety of other tasks. We carry cotton canvas gloves, cotton hot mill, standard leather palm, double leather palm, and Kevlar gloves. Call us today or visit our e-store to see our selection.

read more >

Apparel
Chemicals

Chemicals

Maintaining your machinery and maximizing its productivity requires the right chemical agents.  Ease assembly and disassembly of tooling with anti-seize compounds and high temperature grease.  Release agents used on tooling can make jobs run easier.  Rust preventatives and mold polishes keep your dies ready to go next time you run.  Purges help minimize your changeover time and keep your machines making good product.

read more >

Chemicals

Maintaining your machinery and maximizing its productivity requires the right chemical agents.  Ease assembly and disassembly of tooling with anti-seize compounds and high temperature grease.  Release agents used on tooling can make jobs run easier.  Rust preventatives and mold polishes keep your dies ready to go next time you run.  Purges help minimize your changeover time and keep your machines making good product.

read more >

Chemicals
Extruder Cooling Solutions

Extruder Cooling Solutions

EPF 2501 is a water based product specifically engineered for closed loop water cooled single or twin screw extruders. EPF prevents corrosion. Additives stay in solution.

read more >

Extruder Cooling Solutions

EPF 2501 is a water based product specifically engineered for closed loop water cooled single or twin screw extruders. EPF prevents corrosion. Additives stay in solution.

read more >

Extruder Cooling Solutions
Copper Gauze

Copper Gauze

Keep your extruder, extruder screw, and dies clean with copper gauze.  Copper gauze will not scratch or rust and can be used while the machinery is still hot. Our copper gauze is two grades in one:  Use outside surface for normal cleaning, or turn inside-out for heaving cleaning.  Can be fed directly into extruder hopper of single screw extruders to clean screw and barrel between jobs.  Available in rolls of 100 feet or 400 feet, as well as hand pads.

read more >

Copper Gauze

Keep your extruder, extruder screw, and dies clean with copper gauze.  Copper gauze will not scratch or rust and can be used while the machinery is still hot. Our copper gauze is two grades in one:  Use outside surface for normal cleaning, or turn inside-out for heaving cleaning.  Can be fed directly into extruder hopper of single screw extruders to clean screw and barrel between jobs.  Available in rolls of 100 feet or 400 feet, as well as hand pads.

read more >

Copper Gauze

How can we help you? Find out today.

Put our experts to work solving your machinery repair parts and supplies challenges. We can create custom products and inventory programs to reduce downtime and optimize productivity.

Contact us and we’ll respond quickly, or give us a call at 888.327.5201

©2020 EXTRUSION CONTROL & SUPPLY, LLC.    |    ALL RIGHTS RESERVED.